Nominal Capacity: 10000mAh

Minimum Capacity: 9850mAh

Nominal Voltage: 22.2V for 6S

Internal impedance: ≤16.0mΩ

Dimension: 56*75*178mm

Weight: 1428g

Rapid Charge: 1C 10A

Max Continuous Discharge Current: 25C 250A

Peak Discharge Current: 50C 500A

Connector: XT90, XT150 Anti Spark etc

    Unmanned Aerial Vehicles (UAVs), also known as drones, have become increasingly popular in recent years for various applications such as aerial photography, search and rescue, agriculture, and delivery services. One of the most critical components of a UAV is its battery, as it powers the drone's motors and electronic systems. In this article, we will discuss LiPo batteries, which are commonly used in UAVs, their characteristics, and best practices to ensure their safe and efficient use.

    LiPo batteries are composed of cells, which are connected in series or parallel to achieve the desired voltage and capacity. The voltage of a LiPo cell ranges from 3.7V to 4.35V, depending on the manufacturer and model. The capacity of a LiPo cell is measured in milliampere-hours (mAh), which indicates the amount of current a battery can supply for one hour.

    When charge a LiPo battery, it is important to use a charger specifically designed for LiPo batteries, as they require a specific charging profile to prevent over charging or under charging, over or under charging may lead to bad battery or get fire. LiPo batteries also require storage at a specific voltage range to maintain the life span and prevent damage.

Best Practices for LiPo Batteries in UAVs

Choose the Right Battery

    When selecting a LiPo battery for your UAV, it is essential to consider the voltage and capacity requirements of your drone's motors and electronics. Choosing a battery with too low voltage or capacity can result in reduced performance or even damage to your drone.

Charge and Discharge Carefully

    When charging a LiPo battery, always use a charger designed for LiPo batteries and follow the manufacturer's instructions. It is recommended to charge your battery at a rate of 1C or lower, which means charging at a current equal to the battery's capacity. For example, a 2200mAh battery should be charged at 2.2A or lower.

    Similarly, when discharging a LiPo battery, avoid discharging it below the recommended minimum voltage, which can cause irreversible damage to the battery. Most LiPo batteries have a recommended minimum voltage of 3.0V per cell. You can use a voltage checker or a flight controller with a built-in voltage monitor to ensure that your battery does not discharge below the recommended minimum voltage.

Store Properly

    When storing LiPo batteries, it is essential to store them at a specific voltage range to maintain their lifespan and prevent damage. Most manufacturers recommend storing LiPo batteries at a storage voltage of 3.8V to 3.85V per cell. Storing batteries at a higher or lower voltage than the recommended range can result in reduced lifespan or damage.

Inspect and Replace Regularly

    Regularly inspect your LiPo batteries for any signs of damage, such as bulging, swelling, or punctures. If you notice any damage, immediately dispose of the battery according to your local regulations and replace it with a new one.